Product

SPLQ Series Liquid Accumulator
Products

    The gas-liquid separator is designed with internal bend pipes to prevent from internal splashing and help the aggregation of the oil at the bottom of separator. The separator shall be installed as near to the compressor as possible.

 


    Feature:


    Adaptive to CFC, HCFC, HFC refrigerants

    Solid copper connection

    Corrosion resistant painting

    Maximum operating pressure: 3.1Mpa



 

   

     Specification:

 

 

Type

Connection ODF only(in)

A(in)

B(in)

C(in)

Liquid flow capacity (Tons)

R-12(40F)

R-22/134a(40F)

R-404a/507(40F)

SPLQ-204

1/2

4.0

8.38

2.08

3.5

3.3

3.4

SPLQ-205

5/8

4.0

10.63

2.12

4.4

4.0

4.2

SPLQ-206

3/4

5.5

10.25

3.11

6.1

6.8

6.2

SPLQ-207

7/8

5.5

12.5

3.19

9.8

9.0

9.3

SPLQ-208

1-1/8

6.5

15.63

3.11

14.2

13.1

13.7

SPLQ-209

1-3/8

6.5

20.63

3.31

21.8

20.5

21.2

SPLQ-210

1-5/8

6.5

22.63

3.23

23.8

22.5

23.1

 

 

Type

 

Connection ODF only (in)

 

A(in)

 

B(in)

 

C(in)

Liquid flow capacity (Tons)

 

Holding capacity (LBS .50%Full)

R-12(40F)

R-22/134a(40F)

R404a/507(40F)

SPLQ-596

3/4

5

8.50

2.75

4

6

5.5

SPLQ-597

7/8

5

8.50

2.75

7.3

6

5.5

SPLQ-5126

3/4

5

11.61

2.75

4

8

7.5

SPLQ-5127

7/8

5

11.77

2.75

7.3

8

7.5

SPLQ-5137

7/8

5

13.39

2.75

7.3

8.5

8

SPLQ-5139

1-1/8

5

13.39

2.75

11.8

8.5

8

SPLQ-5179

1-1/8

5

16.93

2.75

11.8

12

10

SPLQ-51711

1-3/8

5

16.93

2.75

18.8

12

10

SPLQ-61411

1-3/8

6

14

2.94

18.8

15

12

SPLQ-62013

1-5/8

6

20.28

2.94

28.5

20

16